Information
24
M3 x 20
mm
M3 x 12
mm
11
12
• Put the extruder into the shown position.
• Remove the screws at the fan.
• Carefully detach the fan.
M3 x 14,5
mm
13
14
• Remove the screws at the heatsink.
• Carefully detach the heatsink.
M3 x 10
mm
15
(1)
(2)
16
• Carefully detach the feeding module
• Carefully detach the feeding module with the PCB.
• Detach the pressing block module (2) from the motor
unit.
• Remove any lament residue from the pressing block.
• Remove any dirt with a soft brush from the bearing (1).