User manual

b) Sound-to-light mode

• Set So01-So27 in the menu to operate the device in sound-to-light operation.

• Select the desired sound-to-light effect under So01-So27.

• For the sound-to-light effects So21-So27, you can additionally set the effect speed with the option SP01-

SP99.

The effect light is controlled via an installed microphone in time with the music in this mode.

c) Automatic operation

• Set the AU01-AU15 in the menu to choose automatic mode.

Select the desired automatic effect with the option AU01-AU15.

• Set the effect speed with the option SP01-SP99.

d) Fade effects

• Set the FA 0-FA 9 in the menu to choose automatic mode.

• Select the desired Fade effect with the option FA 0-FA 9.

• Set the effect speed with the option SP01-SP99.

e) Pre-programmed colour setting

• Set Co01-Co32 in the menu to select the operation with pre-set colours.

• Select the desired colours with Co01-Co32.

• Specify the strobe speed for the operating mode with the option FS00-FS15.

FS 0: No strobe effect

FS 1-FS15: Strobe effect slow > fast

f) Manual colour setting

• Set r000-r255 in the menu to select operation with manual colour settings.

• Set the brightness of the colours red, green and blue with the options r000-r255/G000-G255/b000-b255

and generate the desired mixed colour this way.

r000-r255 Brightness red

G000-G255 Brightness green

b000-b255 Brightness blue

• Specify the strobe speed for the operating mode with the option FS00-FS15.

FS 0: No strobe effect

FS 1-FS15: Strobe effect slow > fast