User manual

34
12. Operation
a) Setting the operating mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Ad-
ditionally, it can be used as a master device with integrated controller to control other connected effect
lights synchronously in master-slave operation, or as slave device via the controller of another effect light.
Use the LED display and function buttons MODE, SET UP, UP and DOWN to set the operating modes.
• Push the button MODE repeatedly until the desired function has been selected.
• Confirm the selection with SET UP.
• Select the desired option 2 (if present) with the UP and DOWN buttons.
• Confirm the selection with SET UP.
Overview of the setting options for the operating mode
Display Option Function
A001-A512 A001-A512 DMX start address
Ch 1-Ch 7 DMX operation with 1-7 channels
So01-So27 So01-So27 27 different sound-to-light effects
SP01-SP99 Effect speed for sound-to-light mode (only at So21-So27)
AU01-AU15 AU01-AU15 15 different automatic programmes
SP01-SP99 Effect speed for automatic mode
FA 0-FA 9 FA 0-FA 9 10 different fade effects
SP01-SP99 Effect speed for fade effects
Co01-Co32 Co01-Co32 32 pre-programmed colours
FS00-FS15 Strobe speed (FS00 = Strobe off)
r000-r255 r000-r255 Static colour, brightness red
G000-G255 Static colour, brightness green
b000-b255 Static colour, brightness blue
FS00-FS15 Strobe speed (FS00 = Strobe off)
Leon-LeoF Leon-LeoF Leon = Display always on
LeoF = Display switches off after a brief time
Led Display reversion
Iron-IroF Iron = IR remote control on
IroF = IR remote control off