User manual

Symbol Option Function

Addr 001-507 Setting the DMX starting address

VEr db20 Display of the software version

Led on Display permanently on

oFF Display switches on only after pushing a button

SLNd NASt Operation as a master device

SLAv Operation as a slave device

ShNd SoUn Sound-to-light mode

CoLo Automatic operation with colour eects

SPee Speed setting for automatic operation

dISP dISP Display aligned normally

dSIP Display alignment turned by 180°

ChNd 6Ch 6-channel DMX operation

3Ch 3-channel DMX operation

b) Master-Slave Mode

• Set the menu NASt to deﬁne the device as a master (control via the installed controller).

• Set the menu SLAv to deﬁne the device as a slave (control via the controller of the connected master

device).

If the device is to be operated as a single device (stand alone), it must be deﬁned as a master

device.

Only one device in a master-slave-chain must be deﬁned as master device. All other devices

must be deﬁned as slave devices.

c) Sound-to-Light Mode

• Set SoUn in the menu to operate the device in sound-to-light operation.

• The eect light is controlled via an installed microphone in time with the music.