User manual
34
The following table provides information about the eects of the settings on the individual DMX channels.
DMX channel DMX Value Function
1 000-009 No fog
010-255 Fog emission
2 000 Lights o
001-255 Brightness setting dark > bright
3 000-020 Brightness setting with channels 5, 6, 7
021-127 Fixed colour settings
128-255 Colour change slow > fast
4 000-009 Strobe eect o
010-255 Strobe eect slow > fast
5 000 Lights o
001-255 Brightness red dark > bright
6 000 Lights o
001-255 Brightness amber dark > bright
7 000 Lights o
001-255 Brightness blue dark > bright
Ensure that the tank never runs empty during fog operation. Should this happen nevertheless,
turn the fog machine o immediately using the mains switch (1) and let it cool down.
Refill the tank after cooling.
If no fog emerges, the device is still warming up or reheating (the display (2) shows UP and the
indicator LEDs on the wired remote control are not lit).
Slight fog lag after deactivation/disconnection of a device is normal and does not suggest a
defect.
If you no longer require the device, disconnect the mains plug and let the device cool down.
Then empty the tank if the device is not used for any extended period. This prevents leaking of fog
liquid during transport or storage.