Operation Manual

41
Operation
Switching the alarm function on and off
• To deactivate an alarm time programmed before, push the button ALARM (11).
• Select the desired alarm function with the button T+ (4) or T- (3).
• Push the button
/ Select (2) to select OFF.
• Push the button
/ Select (2) again to deactivate the respective alarm time.
• To activate a previously programmed alarm time again, proceed as above but select ON
instead of OFF.
• Push the button
/ Select (2).
• To avoid having to make all settings again, you may also push the button ALARM (11) twice
to return to regular display.
Calling alarm options
• Push the button ALARM (11) and then use the button T+ (4) or T- (3) to select the desired alarm
function.
• Push the button
/ Select (2) repeatedly to call the settings.
• If you want to change the settings, do this by pushing the button T+ (4) or T- (3) as described
in “Programming alarm times”.
• Push the button
/ Select (2) to save the settings and return to the regular display.
Deactivating alarm signal
• Push the button ALARM (11) during the alarm signal to switch it off.
Alarm repetition
• Push the button SNOOZE/Sleep (1) during the alarm signal to interrupt the alarm signal for 5
minutes.
• After the end of 5 minutes, the alarm signal sounds again.

You may repeat this process for up to one hour. Then the alarm signal switches
off automatically.