User manual
28
c) Setting the clock
• Push the PROG button (E). The LED indicator of the PROG button lights up blue and “CLOCK” appears in
the LCD, indicating the clock time set mode is activated.
• Press the HOUR button (B). The LED indicator of the PROGbuttonturnsoandtheLEDindicatorofthe
HOUR button lights up blue. In order to set the hours, press the HOUR button repeatedly until the desired
hour setting is displayed.
• Press the MIN button (A). The LED indicator of the HOURbuttonturnsoandtheLEDindicatorofthe
MIN button lights up blue. Press the MIN button repeatedly until the desired minute setting is displayed.
• Press the PROGbuttonforconrmingyourlastsetting.TheLEDindicatorofthePROGbuttonturnso.
The clock time will be saved. After a few seconds “CLOCK” will disappear from the display. The clock
timesetmodeiscompleted.ThecoeemachinewillswitchtostandbywithallLEDindicatorsbeingo.
If not pressing any button within 15 seconds after activating the setting mode, the setting mode
willbecancelled.Thecoeemachinewillswitchtostandbymode.Theclocktimewillappear
andcontinuesrunningfromthelastenteredsetting.AllLEDindicatorsareo.
The digits run faster when pressing and holding the HOUR or MIN buttons respectively.
The clock time is displayed in 24-hour format.
d) Using the timer function
Before using the timer, the clock time must be set!
• Press the PROG button repeatedly until “TIMER” appears in the display, indicating the timer setting mode
is activated.
• Press the HOUR button. The LED indicator of the PROGbuttonturnsoandtheLEDindicatoroftheHOUR
button lights up blue. In order to set the hours, press the HOUR button repeatedly until the desired hour
setting is displayed.
• Press the MIN button. The LED indicator of the HOURbuttonturnsoandtheLEDindicatoroftheMIN
button lights up blue. Press the MIN button repeatedly until the desired minute setting is displayed.
• Press the PROG buttonforconrmingyour lastsetting.The LED indicatorofthe PROG button turns
o.Thestarttimewillbesaved.Afterafewseconds“TIMER”disappearsfromthedisplay,indicating
thatthetimersettingmodeiscompleted.ThecoeemachinewillswitchtostandbymodewithallLED
indicatorsbeingoandwiththecurrentclocktimebeingdisplayed.
If not pressing any button within 15 seconds after activating the setting mode, the setting mode
willbecancelled.ThecoeemachinewillswitchtostandbymodewithallLEDindicatorsbeing
oandwiththecurrentclocktimebeingdisplayed.
The digits run faster when pressing and holding the HOUR or MIN buttons respectively.
• Press the ON/AUTO/OFF button two times to activate the timer. Brewing will start at the pre-set time. The
LED indicator of the ON/AUTO/OFFashesbluerstandlightsupredoncebrewingstarts.
• You can display the pre-set time in timer set mode. Press the PROG button repeatedly, until “TIMER”
appears in the LCD.