User manual

26
10. Before first time use
• Carefullyunpacktheproductandcheckitforcompletenessandpotentialdamage.Donotusethecoee
machine or glass jar if damaged.
• Rinsethecoeemachinebeforersttimeuse:Refertochapter“b)Brewingandkeepingwarmcoee”.
Butdonotllthepermanentlter(8)withcoeepowder;leaveitempty.Afterbrewing,disposeofthe
hot water in the glass jar. Perform this procedure two times in order to remove any production residue.
• Clean the product and all removable parts as described in chapter “13. Maintenance and cleaning”.
• The product is now ready for use.
11. Operation
a) Installation and connection
Never let the product get in contact with hot surfaces (e.g. stove).
Onlyusetheproductonadry,at,heat-resistantandstablesurface.
There are anti-slip feet on the bottom of the device. If necessary, place a protective mat
underneath the device in order to protect the surface of the worktop.
• Fully unwind the cable (13).
• Installthecoeemachine(5)nearawallsocket.
• Place the glass jar in the center of the keeping-warm plate (14).
• Connect the mains plug to the wall socket.
• The LCD (C) lights up. “12:00” appears in the LCD.