Instructions

26
10. Before first time use
• Carefully unpack the product and check it for completeness and potential damage. Do not use the coffee machine
or glass jar if damaged.
• Rinse the coffee machine before rst time use: Refer to chapter “b) Brewing and keeping warm coffee”. But do not
ll the permanent lter (8) with coffee powder; leave it empty. After brewing, dispose of the hot water in the glass jar.
Perform this procedure two times in order to remove any production residue.
• Clean the product and all removable parts as described in chapter “13. Maintenance and cleaning”.
• The product is now ready for use.
11. Operation
a) Installation and connection
Never let the product get in contact with hot surfaces (e.g. stove).
Only use the product on a dry, at, heat-resistant and stable surface.
There are anti-slip feet on the bottom of the device. If necessary, place a protective mat underneath the
device in order to protect the surface of the worktop.
• Fully unwind the cable (13).
• Install the coffee machine (5) near a wall socket.
• Place the glass jar in the center of the keeping-warm plate (14).
• Connect the mains plug to the wall socket.
• The LCD (C) lights up. “12:00” appears in the LCD.