User manual

30
Front Panel Audio Header This is an interface for the front

panel audio cable that allows

convenient connection and
control of audio devices.
Consumer Infrared Module Header This header can be used to

connect the remote

controller receiver.
J_SENSE
OUT2_L
1
MIC_RET
PRESENCE#
GND
OUT2_R
MIC2_R
MIC2_L
OUT_RET
 
the chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
 
header as below:
 
 
 
 

E. To activate the front mic.
For Windows
®
XP / XP 64-bit OS:
Select “Mixer”. Select “Recorder”. Then click “FrontMic”.
For Windows
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
TM
/ Vista
TM
64-bit OS:
 
“Recording Volume”.
System Panel Header This header accommodates

several system front panel

functions.
Connect the power switch, reset switch and system status indicator
on the chassis to this header according to the pin assignments below.
Note the positive and negative pins before connecting the cables.
Infrared Module Header This header supports an

optional wireless transmitting

and receiving infrared module.