User manual

29
2.9 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the

Serial ATA3 Connectors These six Serial ATA3

 

SATA data cables for internal

storage devices. The current

SATA3 interface allows up to

6.0 Gb/s data transfer rate.

1
USB_PWR
P-8
GND
DUMMY
USB_PWR
P+8
GND
P-9
P+9
USB 2.0 Headers Besides six default USB 2.0

ports on the I/O panel, there

are three USB 2.0 headers on
this motherboard. Each USB 2.0
header can support two USB
2.0 ports.




       
Data Cable cable can be connected to the

SATA / SATA2 / SATA3 hard
disk or the SATA3 connector on
this motherboard.
SATA3_2
SATA3_3 SATA3_5
SATA3_4 SATA3_6
SATA3_1
1
USB_PWR
P-10
GND
DUMMY
USB_PWR
P+10
GND
P-11
P+11