User manual

Voltage Configuration
DRAM Voltage
Use this to select DRAM Voltage. The default vatue is [Auto].
CPU Voltage Offset
Use this to select CPU Voltage Offset. The default
value is [Auto].
NR Voltage
Use this to select NR Voltage. The default value is
[Auto].
HT Voltage
Use this to select HT Voltage. The
default value is [Auto].
Cpu VODA Voltage
Use this to select
Cpu
VDDAVoItage. The default value is [Auto].
PCIE VDDA Voltage
Use this
to
select
PCIE
VDDAVoItage. The default value is [Auto].
SB Voltage
Use this to
select SB
Voltage. The default value is [Auto].
Would you like to save current setting user
defaults?
In this option, you are allowed to bad and save three user defaults
according to your own requirements.
4 Advanced SCreen
In this section, you may set the configurations forffie following items: CPU Configu
ration, Nouth Bridge
Configuration, South Bridge Configuration, Storage
Configura
tion,
Super 10 Configuration,
ACPI Configuration, USB
Configuration and Network
Configuration.
Instant Flash
Instant
Flash is a UEFI flash utility embedded in Flash ROM. This conve
nient UEFI update tool albows you to update system UEFI without enter
ing operating systems
first like
MS-DOS or Windows«0.
Just save the new
UEFI file to your USB flash drive, fioppy disk or hard drive and launch this
tool, then you can update your UEFI only in a few clicks without
prepar
ing an additional floppy diskette or other complicated flash utility. Pbease
be noted that the USB flash drive or hard drive must use FAT32/16f 12 file
system.
lf
you execute Instant Flash utility,
the utility will show the UEFI
files and their respective information. Select the proper UEFI file to up
date your UEFI, and reboot your system after the UEFI update
process is
completed.
Internet Flash
Internet Flash searches for available UEFI firmware
updates from our
servers.
In other words, the system can auto-detect the latest UEFI from
our servers and flash them without entering Windows®
OS.
Please
note
that you must be running on a DHCP configured
Computer in order to en
able this function.
Setting wrong values in this section may cause
the
system
to
malfunction,
0
0)
Lii
8
ASRock 970 Pro3 R2.0 Motherboard
ASRock 970 Pro3 R20 Motherboard
9