User manual

6 Boot Screen
In this section, lt will
display the
available devices
an your system for you to config
ure the
boot
settings and the boot phority.
Fast
Boot minimizes your computer‘s
boot time. There arG
three con
figuration
options: [Disabled]. [Fast] and
[Ultra Fast]. The default value
is
[Disabled].
Please refer to
below descriptions
for the details of these three
opbons:
[Disabled]
- Disable
Fast
Boot.
[Fast] - The only
resthcüon is you may not
boot by using
an USB flash
ddve.
[Ultra
Fast] - There are
a
few restdctions.
1. Only supports Window?
5
UEFI operating System.
2.
You
will not
be
able
to
enter
BIOS Setup (Clear CMOS or
wn utility
in Widowt to
enter BIOS Setup)
3. lt you are using an external
graphics card, the VBIOS
must support
UEFI GOP
in
order
to boot
Boot
From Onboard
LAN
Use
this
item to enable
or disable the
Boot From Onboard
LAN feature.
Setup
Prompt
Timeout
This
shows the
number
of seconds
ta wait for
setup activation key.
65535(OxFFFF)
means
indefl nile waiting.
Bootup
Num-Lock
lt
this item is set
to [On], lt
will automatically
activate the Numeric Lock
function after boot-tip.
Full Screen Logo
Use this
item to
enable
or
disable OEM
Loga. The default value is
[En
abled].
Addon ROM Display
Use
this option to adjust AddOn
ROM
Display.
lt you
enable the option
“Full
Screen Logo“
but you want to See
the AddOn ROM Information
when the
system
boots, please
select
[Enabled].
Configuration options: [Enabled]
and
[Disabled]. The
default
value
is [Enabled].
Boot
Failure Guard
Enable
or disable
the feature
of Boot
Failure
Guard.
Boot
Failure Guard Count
Enable
or
disable
the feature
of Saat Failure
Guard Count.
Fast Boot
0
0,
c
20
ASRock 970 Pro3
P20 Motherboard
ASRock 970
Pro3
R2.0 Motherboard
21