User manual

Internet Setting
Use
this item to
set up the internet connection
mode. Configuration
options:
[DHCP (Auto IP)]
and [PPPOE].
UEFI Download
Server
Use this item to
seleat UEFI firmware
download server for Internet
Flash.
Configuration
options: [Asia], [Europe],
[USA] and [China].
5 Hardware Health Event Monitoring
Sereen
In this section, it allows you to monitor the status of the
hardware
on
your system,
including the parameters
of
the CPU temperature, motherboard temperature, CPU
fan speed, chassis fan speed, and the critical
voltage.
CPU Fan 1 & 2 Setting
This allows you to set the CPU fan 1 & 2 speed. Confi guration options:
[Full
On] and [Automatic Mode].
The default is value [Full On].
Chassis Fan 1 Setting
This allows you to set the
chassis fan 1 speed. Confi guration options: [Full
On], [Manual Mode] and [Automatic Mode]. The default is value
[Full On].
Over Temperature Protectian
Use this to enable or disable Over
Temperature Protection. The default
value
5
[Enabled].
Dehumidifier Function
Users mey prevent motherboard damages due to dampness by
enabling
“Dehumidwier
Function“. When enabling Dehumidifier Function, the Com
puter will power on automatically to
dehumidify the system after entering
S4/S5 state.
Dehumldifier Period
This altows users to configure the period of time until the computer
powers
on and enables “Dehumidifier“ after entering 54/55 state.
Dehumidifler Duratlon
This allows users to configure the duration of the dehumidifying process
before it returns to 54/55
state.
Dehumidifier CPU Fan Setting
Use this setting to configure CPU fan speed while “Dehumidifier“ is en
abled.
4.8 Network
Configuration
‚ii
Co
UI
0
0)
c
w
18
ASRock
970 Pro3 R2.0
Motherboard
ASRock 970 Pro3 R2.0
Motherboard
19