Operation Manual
44
12. Basic steps and settings
a) Turning on and o
1. Connect the power supply. See section
“a) Power supply” on page 41
.
2. Connect the TV box to a TV or monitor. See section
“b) HDMI” on page 41
. Turn
on the TV/monitor.
3. If desired, connect a mouse and keyboard. Refer to
“d) USB (keyboard and mouse,
external storage media)” on page 41
and
“b) Remote control” on page 43
.
4. Press the POWER button (1). The TV box boots up and the homescreen appears
after a few minutes. The status indicator turns blue.
5. Turn o the TV box after you have nished using it. Press and hold the POWER
button for about 10 seconds until the screen turns o.
• Turn o the power supply and remove the power adapter from the mains socket to
turn o the TV box completely.
b) Display
Various settings are available for image transfer.
1. Navigate to the TV box homescreen.
2. Open the
[Setting > Display]
settings window.
3. The following settings are available.
HDMI auto-detection The monitor size is determined automatically
by the TV box. Move the slide switch to
“ON”
to
activate the function.
HDMI Output Mode Setting Move the slide switch (HDMI auto-detection) to
“OFF”
. Choose the required resolution.
Hide Status Bar You can display (
“ON”
) or hide (
“OFF”
) the status
bar using the slide switch.
Display Position Click on
“Display Position”
.
Make ne adjustments to the image size using the
“–/+”
buttons.