Operation Manual
42
e) Ethernet (LAN)
• Use an Ethernet cable to connect to your local network (LAN). Ensure that you
choose a good quality cable (e.g. CAT 6 or CAT 7).
• Do not use any crossover cables.
• Place the end of the Ethernet cable (with RJ-45 connector) into the LAN Ethernet
port. Ensure that the connector locks into place and then connect the other end of the
cable to your router or a switch, depending on the network conguration.
f) Toslink
• Use the OPTICAL connection (8) to establish an optical connection with a suitable
TOSLINK cable.
• Turn o the TV box and the receiver device before establishing the optical connection.
• Ensure that you do not damage the tip of the connector when making the connection.
g) microSD card
• To expand the storage capacity, a microSD card (max. 32GB) can be inserted into the
TF card slot (9) until it clicks into place.
• Supported card types: SDHC, SDXC, max. 32 GB
• Place the contacts facing downwards when inserting.
• Remove the card by pressing it as far as it will go and then release.
h) Audio-Video
• Insert the 3.5mm jack plug on the AV cable (13) into the AV connection (4).
• Connect the RCA connectors to a playback device:
» Red: Right audio channel
» White Left audio channel
» Yellow: Video