Safety data sheet

ManualsBrandsRENKFORCE Manuals3D PrintingFilament ABS plastic 1.75 mm Silver 1 kg

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau

Item no.: 1093331

Material Safety Data Sheet

Page 1 of 7

1. Product & Company Identification

Product: ABS Filament, 1,75 mm, silver

Manufacturer: Conrad Electronic SE

Address: Klaus-Conrad-Str. 1, D-92240 Hirschau

Telephone: +49 (0) 9604 / 40 - 8988

Date of issue: 25.03.2014

Substance or Preparation Substance

Chemical Name Acrylonitrile-Butadiene-Styrene Copolymer

Content > 98 % (Additives ≤ 2 %)

Formula (C3H3N, C4H6, C8H8)x

CAS No. 9003-56-9

Impurities Contributing to Hazard None

2. Hazards Identification

Substance or Preparation Substance

Chemical Name Acrylonitrile-Butadiene-Styrene Copolymer

Content > 98 % (Additives ≤ 2 %)

Formula (C3H3N, C4H6, C8H8)x

CAS No. 9003-56-9

Summary of content (7 pages)

PAGE 1
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1093331 Material Safety Data Sheet 1. Product & Company Identification Product: ABS Filament, 1,75 mm, silver Manufacturer: Conrad Electronic SE Address: Klaus-Conrad-Str. 1, D-92240 Hirschau Telephone: +49 (0) 9604 / 40 - 8988 Date of issue: 25.03.2014 Substance or Preparation Substance Chemical Name Acrylonitrile-Butadiene-Styrene Copolymer Content > 98 % (Additives ≤ 2 %) Formula (C3H3N, C4H6, C8H8)x CAS No.
PAGE 2
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1093331 Material Safety Data Sheet 3. Composition/Information on Ingredients Impurities Contributing to Hazard None Material CAS# Hazard ABS.
PAGE 3
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1093331 Material Safety Data Sheet 5. Firefighting Measures Unusual Explosion Hazard and Fire: The material will burn if exposed to sufficient heat and an ignition source. Avoid dispersion of dust in the air to reduce dust explosion hazard potential. Extinguished Media: Water, Carbon dioxide, Dry chemical power, Foam.
PAGE 4
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1093331 Material Safety Data Sheet 7. Handling and Storage Safe handling advice: Avoid contact with skin and eyes. Avoid dust formation. Workers should be protected from the possibility of contact with molten material during fabrication. Low hazard for usual industrial or commercial handling. Use personal protective equipment. See Section 8. Storage: Store in cool place. Keep at temperatures below 100 °C.
PAGE 5
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1093331 Material Safety Data Sheet 9. Physical and Chemical Properties Appearance: Colorful filament Physical state: Solid Odor: None Odor threshold: No data available pH: Not applicable Vapor pressure: Not determined Vapor density: Not determined Evaporation rate: No data available Density: 1.
PAGE 6
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1093331 Material Safety Data Sheet 11. Toxicological Information Principle Routes of Exposure: Eye contact. Skin contact. Inhalation. Ingestion. Acute toxicity: There were no target organ effects noted following ingestion or dermal exposure in animal studies. Local effects: May cause eye/skin irritation. Product dust may be irritating to eyes, skin and respiratory system.
PAGE 7
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau Item no.: 1093331 Material Safety Data Sheet 13. Disposal Considerations Controlled incineration or landfill according to local, state or national laws and regulations concerning health and pollution. Inadequate incineration may generate toxic gases such as CO, HCN, AN and SM. 14. Transport Information U.S. Department of Transportation (DOT): Proper shipping name: None Hazard class: Not regulated.