User manual

There also are slight deviations in individual illustrations

betweenthe“iOS-app”andthe“Android-app”.Theg-

ures shown in these operating instructions have been

generated for the Android operating system.

Generally, software is changing continually and can

change visually due to updates. The respective handling

is not affected, however.

a) Installing the App

A special app can be used to display the measured results on your

tablet or smartphone. There are suitable apps available for this

for devices with the operating system “iOS” (Apple products, as of

version 7.1) and the operating system “Android” (as of version 4.3).

The app can be installed in different languages.

Connect your mobile end device (tablet or smartphone) to the

internetand nd theapp“BTLogger” (see gure3)in the “App

Shops”matchingyouroperatingsystem(seegure2).Installthe

app on your device. The app is free of charge. At most, the costs

that would usually arise for downloading an app will arise.

Getting started

1 Install battery:

1.1 Unlock the screw and open the battery door .

1.2 Insert 2 x AAA batteries in polarity (+) and (-) as

indicated.

1.3 Close the battery door and tighten the scre w.

Figure 2 Figure 3