Manualshelf

Datasheet

ManualsBrandsRENKFORCE ManualsLight BulbsLED (monochrome) 12 V G4 3 W = 30 W Warm white EEC: A Pen (Ø x L) 35 mm x 47 mm 1 pc(s)
12
Data required for directional LED bulb:
File-number
9283c72b
Nominal-voltage (V)
12Vdc
Nominal-power-consumption (W)
2.76W
Nominal-current-consumption (A)
0.23A
Nominal-frequency (Hz) or DC
/
Nominal-useful-luminous flux (lm)
300lm
Nominal-lifetime (h)
30000H
Colour temperature (K)
6300K
±10%
Number of switching cycles before premature lamp
failure
20000 Times
Lamp warm-up time to 60 % of full light output (s)
<0.5S
Dim / no dim
Kind of dimming: Leading edge or trailing edge
no dim
Ambient temperature (Ta in °C), if not 25 °C
-20
°~+40°
Dimensions (Ø x length in mm)
Ø 35x47mm
Nominal beam angle (°)
120
°
Suitable for accent lighting (Y / N)
See EC regulation 1194/2012; Annex III 3.1.2 j)
N
Drawing of the lamp and of the comparing filament lamp
See EC regulation 1194/2012; 3.1.2 k)
--- Create packing department ---
N/A
Power-consumption equivalence incandescent lamp
See EC regulation 1194/2012; Annex III 3.1.2 m)
(directional lamp)
See EC regulation 244/2009 table 6 (non directional
lamp)
28W
Rated power consumption (W) *)
2.76W
±10%
Rated useful luminous flux (lm)
300Lm±10%
Rated-lifetime (h)
30000H
Lamp power factor
/
Lumen maintenance factor at the end of the nominal life
>70%
Starting time (s)
<0.5S
Colour rendering (Ra)
Ra>80
Colour consistency (cx, cy)
X=0.337
Y=0.345
Rated peak intensity (cd)
N/A
Rated beam angle (°)
120
°
Intended for use in outdoor application (Y / N)
N
Intended for use in industrial application (Y / N)
N
Spectral power distribution in the range 180-800 nm
Diagram; Example see below
N/A
Socket
G4
Energy efficiency class according 874/2012/EC
A
Weighted energy consumption (Ec) in kWh / 1000 h
2.76
Legend:
a) A ‘rated’ value means a quantity value for a characteristic of a product for operating conditions specified in this
Regulation or in applicable standards. This value is usually described in a range, e.g.: 10V – 30V DC
b) A ‘nominal’ value means an approximate quantity value used to designate or identify a product.This is usually
described in specific value (not in a range), e.g.: 12V

Summary of content (2 pages)