Manualshelf

Datasheet

ManualsBrandsRENKFORCE ManualsLight BulbsLED (monochrome) G4 Pen 2.8 W = 15 W Warm white (Ø x L) 44.3 mm x 54.3 mm EEC: n/a 1 pc(s)
1
Data required for directional LED bulb:
File-number LN-04-15BS-S-30D-CW-00
Bulb material Glass fiber and led
LED source Genesis SMD5050
Number of LED 15leds
Nominal-voltage (V) 10-30V DC
Nominal-power-consumption (W) 3
Rated power consumption (W) *) 3
Nominal-current-consumption (mA) 170
Nominal-frequency (Hz) or DC 50~60 Hz
Nominal-luminous flux (lm) 240
Rated useful luminous flux (lm) 240
Nominal-lifetime (h) 35000
Rated-lifetime (h) 35000
Nominal beam angle (°) 120
Rated beam angle (°) 120
Rated peak intensity (cd) 455
Colour temperature (K) 5800-6800
Colour rendering (Ra) 75
Colour consistency (cx, cy) X=0.3074 y= 0.3298
Lamp power factor >=0.9
Lumen maintenance factor at the end of the nominal life 50%
Socket G4
Starting time (s) <0.1
Spectral power distribution in the range 180-800 mm N/A
Weighted energy consumption (Ec) in kWh / 1000 h 3 kWh / 1000 h
Lamp warm-up time to 60 % of full light output (s) <0.1
Number of switching cycles before premature lamp
failure >30000
Intended for use in outdoor application (Y / N) N
Intended for use in industrial application (Y / N) Y
Suitable for accent lighting (Y / N)
See EC regulation 1194/2012; 3.1.2 j) Y
Dim / no dim
Kind of dimming: Leading edge or trailing edge No dim
Energy efficiency class according 874/2012/EC A
Drawing of the lamp and of the comparing filament lamp
See EC regulation 1194/2012; 3.1.2 k)
--- Create packing department ---
Indication to type lamp
See EC regulation 1194/2012; 3.1.2 l) directional light
Power-consumption equivalence incandescent lamp
See EC regulation 1194/2012; 3.1.2 m) (directional lamp)
See EC regulation 244/2009 table 6 (non directional
lamp) 30w
Ambient temperature (Ta in °C)
‐20‐+40℃
Bulb dimensions (Ø x length in mm) 44.3*44.3
Bulb weight (g) 7
Legend:
a) A ‘rated’ value means a quantity value for a characteristic of a product for operating conditions specified in this
Regulation or in applicable standards. This value is usually described in a range, e.g.: 220V – 240V AC
b) A ‘nominal’ value means an approximate quantity value used to designate or identify a product.
This is usually described in specific value (not in a range), e.g.: 230V

Summary of content (1 pages)