Instructions
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2017 by Conrad Electronic SE. 1574788_V1_1117_02_VTP_m_en
Getting started, operation
Read and follow the chapter “Safety instructions” carefully.
• Completely unwind the cable of the outlet strip.
• Plug the earthed mains plug of the power strip into a regular earthed mains socket (wall
socket).
• Place the power strip in an appropriate place. Protect valuable furniture surfaces by using a
suitable underlay to prevent scratches. Place the cables in such a way that nobody can trip
over them.
• Connect the consumer loads to the sockets of the outlet strip.
• The on/off switch allows you to switch all connected consumers on or off. When the adapter
is switched on, a control light in the on/off switch is activated.
• The power strip can be hung horizontally or vertically on two hooks or screws e.g., on a wall
using the two cross-shaped openings at the bottom.
Surge protection
The power strip has surge protection. The surge protection is ready when the red warning
lamp shines.
If the red warning light does not shine, the surge protection has tripped. In this case, the socket
strip may still be used, but surge protection is no longer provided.
The green control light indicates that the protective conductor is available (indicator light is
activated).
If the socket strip is connected to the mains voltage (and the mains voltage is avail-
able), but the green indicator light does not shine, something is wrong with the volt-
age/power supply. Unplug the mains plug of the socket strip from the mains socket.
Do not connect any device to the mains socket, but have it checked by an expert.
USB power output
The power strip has two type A USB sockets. This can be used to charge suitable devices, such
as smartphones. A total current of 2.1 A is available, split between both USB sockets.
Maintenance and care
• The product is maintenance-free for you. The product contains no parts that require servic-
ing. Therefore, do not open/dismantle it. Maintenance or repair may only be performed by
qualied personnel or a specialised repair shop.
• Before cleaning the socket strip, rst disconnect all loads.
Then unplug the socket strip from the mains socket (wall socket).
• Use a clean, dry and soft cloth for cleaning.
• Dust can easily be removed using a clean, soft, long-bristled brush and a vacuum cleaner.
Do not use abrasive cleaning agents, cleaning alcohol or other chemical solutions
since these could damage the housing or even impair operation.
Disposal
Electronic devices are recyclable material and do not belong in the household
waste. Dispose of an unserviceable product in accordance with the relevant statu-
tory regulations.
Technical data
Connection data .................................. 250 V/AC, 50 Hz, 16 A
Total connected load ............................ max. 3680 W
Protection socket ................................. 8
Socket with child protection ................. yes
On/off switch ........................................ yes (two-pole switch, L/N)
Surge protection .................................. yes, leakage current 9 kA
USB ports ............................................ 2x, output voltage 5 V/DC, total output current max.
2.1 A
Cable length ........................................ 1.5 m
Cable type ........................................... H05VV-F 3G1.5 mm²
Dimensions (L x W x H) ....................... 280 x 118 x 42 mm
Weight ................................................. 0.58 kg
Ambient conditions .............................. Temperature -10 to +50 °C, relative air humidity 10%
to 90%, noncondensing