User manual

31
Setting master-slave mode
• Use the MENU button to select SLNd in the menu and push the ENTER button.
• Select the desired DMX-operating mode with the UP and DOWN buttons.
NASt Master mode (automatic mode)
SL 1 Normal slave mode (The device acts synchronously to the master)
SL 2 Inverted slave mode (The device acts inverted to the master)
• PresstheENTERbuttontoconrmyourselection.
 Ifthedeviceistobeoperatedasasingledevice(standalone),itmustbedenedasamasterdevice.
 Onlyonedeviceinamaster-slave-chainmustbedenedasmasterdevice.Allotherdevicesmustbe
denedasslavedevices.
The following tables provide information about the effects of the settings on the individual DMX channels.
10-channel DMX operation
DMX channel Value Function
1 000-255 PAN-movement
2 000-255 TILT-movement
3 000-255 Zoom function
4 000-255 Brightness red
5 000-255 Brightness green
6 000-255 Brightness blue
7 000-255 Brightness white
8 000-255 Overall brightness
9 000-007 Lights off
008-015 Continuous light
016-131 Strobe slow > fast
132-139 Continuous light
140-181 Strobe with fade-in effect slow > fast
182-189 Continuous light
190-231 Strobe with fade-out effect slow > fast
232-239 Continuous light
240-247 Strobe with changing speeds
248-255 Continuous light
10 000-179 no function
180-189 Automatic mode
190-199 no function
200-209 Reset
210-255 no function