User manual

30
Menu Item Option Function
dISP dISP Display alignment normal
dSIP Display alignment inverted
PInt no PAN-movement not inverted
YeS PAN-movement inverted
tInt no TILT-movement not inverted
YeS TILT-movement inverted
bALA red White reconciliation red share 125-255
Gee White reconciliation green share 125-255
bLu White reconciliation blue share 125-255
NAnu PAn Manual setting of the PAN-position
tILt Manual setting of the TILT-position
ZooN Manual setting of the zoom function
red Manual brightness change for red colour
Gee Manual brightness change for green colour
bLu Manual brightness change for blue colour
Uhi Manual brightness change for white colour
dINN Manual setting total brightness
Stro Manual setting strobe speed
teSt Self-test function
rSet U402 Performing a reset
b) Use with an external DMX controller
EachDMXdeviceinaDMXchainrequiresaso-calledDMXstartingaddresstobeclearlyidentiedbythe
controller.ThisDMXstartingaddressspeciestherstDMXchanneltowhichtheeffectlightresponds.The
remainingcontrolchannelscomeafterthisrstDMXchannel(DMXstartingaddress).
The effect light requires 10, 12 or 15 free DMX channels depending on the operating mode.
Setting the DMX starting address
• Use the MENU button to select addr in the menu and push the ENTER button.
• Select the desired starting address 1-512 with the UP and DOWN buttons.
• PresstheENTERbuttontoconrmyourselection.
Setting the DMX channel number
• Use the MENU button to select ChNd in the menu and push the ENTER button.
• Select the desired DMX channel number (10, 12 or 15) with the UP and DOWN buttons.
• PresstheENTERbuttontoconrmyourselection.