User manual
29
10. Operation
a) Setting the operating mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Additionally, it can
be used as a master device with integrated controller to control other connected effect lights synchronously in master-
slave mode, or as slave device via the controller of another effect light.
After connection to the mains, the effect light will perform a reset. Only after this process is completed will
the device be ready.
• Use the display and MENU and ENTER buttons as well as the UP and DOWN buttons to set the operating mode.
• Press the MENU button to select the individual menu items.
• Push the ENTER button.
• Change the values to be set or options with the UP or DOWN buttons.
• ConrmtheselectionwiththeENTERbutton.
• To go back one level in the menu without changes, push the MENU button once.
Menu overview
For a more detailed explanation of the individual menu items from the table, see the following items of these
instructions.
Menu Item Option Function
addr 1-512 Setting the DMX starting address
ChNd 10Ch 10-channel DMX operation
12Ch 12-channel DMX operation
15Ch 15-channel DMX operation
SLNd NASt Device is in master mode
SL 1 Device is in slave mode 1 (normal)
SL 2 Device is in slave mode 2 (inverted)
ShNd Sh 1 - Sh 4 4 different demo shows
Auto oFF Automatic mode deactivated
on Automatic mode activated
SoUn oFF Sound-to-light mode deactivated
on Sound-to-light mode activated
SenS 0-100 Setting of the music sensitivity for sound-to-light operation
bLNd no Pause function deactivated
YeS Pause function activated
Led oFF Display switches off after approx. 1 minute
on Display permanently on