User manual

3. Intended use

The LED Moving Head is used to generate light effects in light show equipment, party rooms, etc. and is controlled

by the built-in controller or an external DMX controller.

This product is only approved for connection to 100-240 V/AC, 50-60 Hz alternating current and only for use with an

earthed mains socket.

The DMX connections must only be connected to suitable DMX controllers or other DMX devices.

It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided

under all circumstances.

For reasons of safety and approval, the product must not be converted and/or changed by you. Using the product

for any other purposes than those described above may damage the product. Improper use also may cause

dangerssuchasshortcircuit,re,electricshock,etc.Readtheoperatinginstructionspreciselyandkeepthem.Only

pass the product on to any third parties together with the operating instructions.

4. Scope of delivery

• LED moving head

• Assembly bracket

• Safety eyelet

• 2x screws

• Mains cable

• Operating instructions

Up-to-date operating instructions

Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR

code. Follow the instructions on the website.