User manual

25
b) Fuse replacement
Ifyouhavetoreplacethefuse,ensurethatyouonlyusefusesofthespeciedtypeandratedcurrent(see“Technical
data”)asareplacement
Never repair fuses or bridge the fuse holder.
• Unplugthemainsplugfromthemainssocketandthelow-voltagelinefromthemainsconnectiononthedevice.
• Usingasuitablescrewdriver,carefullypushthefuseholderatthemainsconnection.
• Removethedefectivefuseandreplaceitwithanewfuseoftheindicatedtype.
• Carefullypushthefuseholderwiththenewfusebackintoitspositionatthemainsconnectionofthedevice.
• Afterthis,youcanreconnectthedevicetothemainsandtakeitintooperation.
12. Handling
• Neverconnectthemainsplugtoamainssocketimmediatelyafterthedevicehasbeentakenfromacoldtoawarm
environment. The resulting condensation may destroy the device.
Allowthedevicetoreachroomtemperaturebeforeconnectingit.Waituntilthecondensationhasevaporated.
• Neverpullthemainsplugfromthemainssocketbythecable.Onlypullitfromthemainssocketbytheintended
gripareas.
• Alwayspullitfromthesocketusingtheintendedgrips.
• Disconnectthemainsplugfromthemainssocketduringthunderstormsforreasonsofsafety.
• Neverputanylterfoils,masksorothermaterialsoverthelightexit.Thismaycauseheatdamageanddangerof
re.
• Thedevicemayheatupduringoperation.Nevertouchthecasingduringoperation.Lettheeffectlightcooloffafter
operationbeforetouchingorcleaningthecasing.
• Donotcoverthedevicetoensuresufcientventilation.Aircirculationalsomustnotbeimpairedbyanyobjects
likemagazines,tablecloths,curtains,etc.Duringoperation,keepaminimumdistanceof0.5maroundthedevice.