User manual

23
d) Master mode
• Set the desired auto mode or sound mode at the master device.
AnLV-DJ13device in automodeoperationor sound modeoperationwillautomatically work asmaster
device.
 Onlyonedeviceinamaster-slave-chainmustbedenedasmasterdevice.Allotherdevicesmustbe
denedasslavedevices.
 Therstdeviceisalwaysdenedasthemasterdevice.Allotherdevicesinseriesareslavedevices.
e) Slave mode
• Use the MENU button to select SLAVE mode (SLAu).
f) Use with an external DMX controller
EachDMXdeviceinaDMXchainrequiresaso-calledDMXstartingaddresstobeclearlyidentiedbythecontroller.
ThisDMXstartingaddressspeciestherstDMXchanneltowhichtheeffectlightresponds.Theremainingcontrol
channelscomeafterthisrstDMXchannel(DMXstartingaddress).
 Theeffectlightrequires8DMXchannels.
Setting the DMX Start Address and the DMX Mode
• SelectDMXoperation(displayA001-A512)withtheMENUbutton.
• Select the desired start address A001 - A512 with the UP and DOWN buttons.
ThefollowingtableprovidesinformationabouttheeffectsofthesettingsontheindividualDMXchannels.
Channel Value Function
1 0 ~ 255 Master Dimmer
2 0 ~ 255 Red
3 0 ~ 255 Green
4 0 ~ 255 Blue
5 0 ~ 255 White
6 0 ~ 255 Strobe from slow to fast
7 0 ~ 255 LED rotation
8 0 ~ 255 Sound mode