User manual

22
10. Operation
a) Setting the operating mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Additionally, it can
be used as a master device with integrated controller to control other connected effect lights synchronously in master-
slaveoperation,orasslavedeviceviathecontrollerofanotherLV-DJ13LEDeffectdevice.
UsetheLEDdisplayandfunctionbuttonsMENU,DOWNandUPtosetthedevice.
• Push the MENU button to choose the setting mode.
• Select the desired setting with the UP and DOWN buttons.
The ENTER button has no function in this version.
Thefollowingtableshowstheeffectsofthesettingsonthecontrolpanel.
Display Mode UP/DOWN
AXXX DMX Address A001 -A512
SLAu Slave Mode SLAu = Slave mode activated
A1_X Red A1_1 - A1_9 / Rotation from slow to fast
A2_X Green A2_1 - A1_9 / Rotation from slow to fast
A3_X Blue A3_1 - A1_9 / Rotation from slow to fast
A4_X White A4_1 - A1_9 / Rotation from slow to fast
A5_X RGBW change A5_1 - A1_9 / Rotation from slow to fast
A6_X RGBW Mix A6_1 - A1_9 / Rotation from slow to fast
A7_X Colour change + strobe A7_1 - A1_9 / Rotation from slow to fast
S1_X Sound Mode 1 S1_0 - S126 (The setting changes automatically)
S2_X Sound Mode 2 S2_0 - S211 (The setting changes automatically)
S3_X Sound Mode 3 S3_0 - S311 (The setting changes automatically)
b) Auto mode
• UsetheMENUbuttontoselectthecorrespondingautomode(A1_X-A7_X).
• SelectthedesiredrotationspeedwiththeUPandDOWNbuttons.
c) Sound mode
• UsetheMENUbuttontoselectthecorrespondingsoundmode(S1_X-S3_X).
 SettingswiththeUPorDOWNbuttonarenotrequired.DuringsoundmodeS1,S2orS3,youcanswitch
automatically between the individual sub settings.
 Example:UsetheMENUbuttontoselectsoundmodeS1.ThesettingcumulativelyswitchesfromS1-0to
S211dependingonsetting.Thechangeisdisplayedaccordingly.