User manual
20
8. DMX connection
Use of XLR microphone cables may cause interferences in the DMX signal transmission. In this
case, please use special DMX high-frequency cables.
a) Connection of a DMX controller
Only connect the device to a DMX controller with a DMX-512 protocol.
• ConnecttheDMXINinputtotheDMXcontrolleroutput.
• Use a screened XLR cable for this. The controller must have 8 free control channels.
• ConnecttheDMXOUToutputtotheDMXinputofthenextdeviceinsequence.Iftheeffectlightisthelastoronly
deviceintheDMXchain,insertaplugwitha120Ohm/0.25Wterminatorhere(betweenPin2andPin3).
Pin assignment of the DMX connection: Pin1 = earth / Pin2 = (-) / Pin3 = (+).
NeverconnecttheearthpinGNDtothecasingearthoftheeffectlight;thismayresultininterferenceinsignal
transmissioncausedbygroundloops.