User manual

37
h) Setting the Display Alignment
• Use the MENU (4) button to select dISP in the menu and push the ENTER (7) button.
• Select the desired display alignment with the UP (6) and DOWN (5) buttons.
dISP normal display alignment
dSIP inverted display alignment
• PresstheENTERbutton(7)toconrmyourselection.
If you want to operate the device suspended, the display alignment should be inverted.
i) Setting the PAN-movement
• Use the MENU (4) button to select PAn in the menu and push the ENTER (7) button.
• Select the desired direction of the PAN movement with the UP (6) and DOWN (5) buttons.
YeS PAN-movement inverted
no PAN-movement not inverted
• PresstheENTERbutton(7)toconrmyourselection.
j) Setting the TILT-movement
• Use the MENU (4) button to select tILt in the menu and push the ENTER (7) button.
• Select the desired direction of the TILT movement with the UP (6) and DOWN (5) buttons.
YeS TILT-movement inverted
no TILT-movement not inverted
• PresstheENTERbutton(7)toconrmyourselection.
k) Self-test function
• Use the MENU (4) button to select teSt in the menu and push the ENTER (7) button.
• The device performs a self-test and then returns to normal operating mode.
l) Display of the operating hours
• Use the MENU (4) button to select FhrS in the menu and push the ENTER (7) button.
• The display (3) shows the number of operating hours that the device has completed already.
m) Display of the software version
• Use the MENU (4) button to select ver in the menu and push the ENTER (7) button.
• The display (3) shows the software version of the device.