User manual

36
d) Sound-to-light mode
• Use the MENU (4) button to select SoUn in the menu and push the ENTER (7) button.
• Select the desired operating mode with the UP (6) and DOWN (5) buttons.
on Sound-to-light mode activated
oFF Sound-to-light mode deactivated
• PresstheENTERbutton(7)toconrmyourselection.
The device is controlled via the installed microphone (2) in time with the music in this mode.
e) Setting of the microphone sensitivity in sound-to-light operation
• Use the MENU (4) button to select SenS in the menu and push the ENTER (7) button.
• Select the desired microphone sensitivity with the UP (6) and DOWN (5) buttons.
0 Microphone sensitivity low
100 Microphone sensitivity high
• PresstheENTERbutton(7)toconrmyourselection.
Set the microphone sensitivity so that the light effect changes in time with the music.
f) Blackout Mode
• Use the MENU (4) button to select bLAC in the menu and push the ENTER (7) button.
• Select the desired function with the UP (6) and DOWN (5) buttons.
YeS Light is switched off (blackout function is activated)
no Light is switched on (blackout function is deactivated)
• PresstheENTERbutton(7)toconrmyourselection.
g) Display deactivation
• Use the MENU (4) button to select Led in the menu and push the ENTER (7) button.
• Select the desired function with the UP (6) and DOWN (5) buttons.
on Display (3) permanently on
oFF The display (3) switches off after approx. 70 s after the last button is pushed.
When any button is pushed again, the display (3) will be activated again.
• PresstheENTERbutton(7)toconrmyourselection.