User manual
28
10. Operation
a) Setting the Operating Mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Additionally, it can
be used as a master device with integrated controller to control other connected effect lights synchronously in master-
slave mode, or as slave device via the controller of another effect light.
After switching on (putting the ON/OFF switch in the ON position), the light effect will perform a reset. Only
after this process is completed will the device be ready.
Use the display and buttons MENU and ENTER as well as the arrows to set the operating mode.
• Push the ENTER button to get to the menu selection for the individual menu items.
• Move through the menu using the arrows.
• Select menu items with the button ENTER and change the values or options to be set with the arrows.
• Conrm the selection with the ENTER button.
• To jump one level back in the menu or to call the last item selected again, push the button MENU.
Menu Overview
Menu Item Option Function
DMX Addr 001-512 Setting the DMX starting address
CH Mode 9 9-channel DMX operation
15 15-channel DMX operation
Work Mod DMX DMX mode
Auto Automatic mode
Sound Sound-to-light mode
Master No Device is in slave mode
Yes Device is in master mode
Pan Inve No Normal rotating direction
Yes Rotating direction is inverted
Tilt Inv No Normal swivel direction
Yes Swivel direction is inverted
Soud Sen 00-99 Setting of the music sensitivity for sound-to-light operation
BK Light Off Automatic deactivation of the display
Always The display is permanently on
Reset No No reset
Yes Performing a reset (after approx. 10 seconds)
Factory Set Menu for service purposes (please do not make any changes)