User manual

39
13. Handling
• Neverconnectthemainsplugtoamainssocketimmediatelyafterthedevicehasbeentakenfromacold
to a warm environment. The resulting condensation may destroy the device. Allow the device to reach
room temperature before connecting it. Wait until the condensation has evaporated.
• Neverpluginorunplugthemainsplugwhenyourhandsarewet.
• Neverpullthemainsplugfromthemainssocketbythecable.Onlypullitfromthemainssocketbythe
intended grip areas.
• Unplugthemainsplugfromthemainssocketifyouarenotusingthedeviceforanextendedperiodof
time.
• Disconnectthemainsplugfromthemainssocketduringthunderstormsforreasonsofsafety.
• Neverputanylterfoils,masksorothermaterialsoverthelightexit.Thismaycauseheatdamageand
danger of fire.
• Thedevicemayheatupduringoperation.Nevertouchthecasingduringoperation.Lettheeectlight
cool o after operation before touching or cleaning the casing.
• Donotcoverthedevicetoensuresucientventilation.Aircirculationandthemovementoftheprojector
head must not be impaired by objects such as magazines, tablecloths, curtains, etc. During operation,
keep a minimum distance of 0.5 m around the device.
• Thedeviceisnotsuitableforcontinuousoperation.Pausesinoperation(every2hours)increasethe
operational life span of the device. Let the device cool down for 5-10 minutes before using it again after
a break.