User manual

37
Performing a reset
• Inthemenu,selectADVAandpushtheENTER(7)button.
• SelecttheitemSystemResetwiththeUP(5)andDOWN(6)buttons.
• PushthebuttonENTER(7)andselectSUREwiththebuttonUP(5),toresettheeectlight.SelectNOwith
the button DOWN (6), in order to not reset the eect light.
• PresstheENTERbutton(7)toconrmyourinput.
Resetting to the Factory Settings
• Inthemenu,selectADVAandpushtheENTER(7)button.
• SelecttheitemFactorySettingwiththeUP(5)andDOWN(6)buttons.
• PushthebuttonENTER(7)andselectSUREwiththebuttonUP(5),toresettheeectlighttofactoryset-
tings. Select NO with the button DOWN (6), in order to not reset the eect light to factory settings.
• PresstheENTERbutton(7)toconrmyourinput.
i) Calling Information
• Inthemenu,selectSTATandpushtheENTER(7)button.
• Thisoverviewshowstheoperatingstatusofthedevice:
Work Mode = Operating mode
Address = Selected DMX address
Version = Firmware version
Elapse = Operating duration since the last commissioning
Total = Total operating duration