User manual

34
c) Automatic Operation
• Inthemenu,selectMODEandpushtheENTER(7)button.
• SelecttheoperatingmodeAutoRunwiththeUP(5)andDOWN(6)buttons.
• PushtheENTERbutton(7)toconrmyourselection.
The device performs an automatically controlled light show in this operating mode.
d) Sound-to-Light Mode
• Inthemenu,selectMODEandpushtheENTER(7)button.
• SelecttheoperatingmodeSoundCtrlwiththeUP(5)andDOWN(6)buttons.
• PushtheENTERbutton(7)toconrmyourselection.
• Select the menu item Soud Sensitive with the buttons UP (5) and DOWN (6) and push the button
ENTER (7).
• SetthemicrophonesensitivitywiththebuttonsUP(5)orDOWN(6)andconrmyourinputwiththebutton
ENTER (7).
The device is controlled via the installed microphone in time with the music in this mode.
The LED MIC (1) is activated in this operating mode.
Set the microphone sensitivity so that the light eect changes in time with the music.
e) Master-Slave Mode
• Inthemenu,selectMODEandpushtheENTER(7)button.
• SelecttheitemM/SChoosewiththeUP(5)andDOWN(6)buttons.
• SelectONorOFFwiththebuttonENTER(7):
ON = Master
OFF = Slave
If the device is to be operated as a single device (standalone), it must be defined as a master
device.
Only one device in a master-slave-chain must be defined as master device. All other devices
must be defined as slave devices.