User manual

33
b) Use with an External DMX Controller
EachDMXdeviceinaDMXchainrequiresaso-calledDMXstartingaddresstobeclearlyidentiedbythe
controller. This DMX starting address specifies the first DMX channel to which the eect light responds.
The remaining control channels come after this first DMX channel (DMX starting address).
 Theeectlightrequires13freeDMXchannels.
Setting the DMX starting address
• Inthemenu,selectADDRandpushtheENTER(7)button.
• Selectthedesiredstartingaddress001-512withtheUP(5)andDOWN(6)buttons.
• PushtheENTERbutton(7)toconrmyourselection.
Setting the DMX operating mode
• Inthemenu,selectMODEandpushtheENTER(7)button.
• SelecttheoperatingmodeDMXCtrlwiththeUP(5)andDOWN(6)buttons.
• PushtheENTERbutton(7)toconrmyourselection.
The following table provides information about the eects of the settings on the individual DMX channels.
DMX channel Value Function
1 000-255 Rotating movement PAN
2 000-255 Swivel movement TILT
3 000-255 Overall brightness
4 000-255 Brightness red
5 000-255 Brightness green
6 000-255 Brightness blue
7 000-255 Brightness white
8 000-005 Strobe eect o
006-130 Strobe eect 1 slow > fast
131-135 Strobe eect o
136-255 Strobe eect 2 slow > fast
9 000-252 Speed PAN/TILT movement
253-255 Light is switched o during PAN or TILT movements
10 000-255 Fine setting PAN
11 000-255 Fine setting TILT
12 000-005 Macro operation o
006-130 Colour macro 1 slow > fast
131-255 Colour macro 2 slow > fast
13 000-253 no function
254-255 Reset