User manual

Safety instructions
Read first carefully the complete operating instructions, which include important in-
formation on the operation.
The warranty will be void in the event of damage caused by failure to observe these
safety instructions! We do not assume any liability for any resulting damage!
We do not assume any liability for personal injuries and material damages caused by
the improper use or non-compliance with the safety instructions! In such cases, the
warranty will be null and void!
• Adjustments or maintenance work should only be carried out by trained profession-
als who are aware of the dangers. Improperly executed adjustments might result in
dangerous laser radiation.
• For safety reasons, any unauthorised conversion and/or modification of the product
is not permitted.
• When operating the laser equipment, always make sure that the laser beam is di-
rected such that there is nobody in the projection area and that unintentionally re-
flected beams (e.g., from mirrors) cannot reach areas where people are present.
• Laser radiation can be dangerous if the laser beam or its reflection enters unprotect-
ed eyes. Therefore, before using the laser equipment, familiarise yourself with the
statutory regulations and safety instructions for operating such a laser device.
• Never look directly into the laser pointer and never aim the laser at another person
or animals. Laser radiation may result in injuries to the eyes or skin.
• Do not under any circumstances look into the laser beam using optical instruments
(e.g., magnifying glasses or binoculars). This will increase the risk of eye injuries
drastically.
• Do not point the laser beam at mirrors or other reflective surfaces. The uncontrolled,
reflected beam may strike people or animals.
• Only operate the laser in an attended area.
• Limit the beam path as much as possible by using screens or dividing walls.
• Mark the range of the laser by using barriers or by using warning signs.
• Wherever possible, direct the laser in such a way that it does not cross eye level.
• Caution: If operation settings or procedures other than those described here in these
instructions are used, it could result in exposure to dangerous radiation.
• This product is equipped with a Class 3R Laser. Laser signs in different languages are
included in the package. If the sign on the laser is not written in the language of your
country, please affix the appropriate sign onto the laser.
Laser warning sign:
Labelling at the laser beam exit:
• Never look directly into the laser light source when the device is in operation. The
intense light rays could temporarily impair your eyesight. Moreover, they may trigger
epileptic seizures in vulnerable persons. This applies in particular to epileptics.
• The device contains no parts that are to be serviced by the user. Therefore, do not
open the device.
• Use only the supplied mains adapter as a power source.
• Connect the mains adapter only to a normal mains socket connected to the public
supply network. Before plugging in the power adapter, check whether the voltage
indicated on the power adapter matches the voltage of your electricity supplier.
• Power adapters must never be plugged in or disconnected when your hands are wet.
• Never unplug the power unit from the mains socket by pulling on the cable; always
use the provided handles which are intended specifically for this purpose.
• For safety reasons, always disconnect the power unit from the mains socket during
thunderstorms.
• The device is not a toy. Children and adolescents cannot judge the dangers of elec-
trical devices and lasers.
• Do not leave packaging materials unattended. It may become a dangerous plaything
for children.
• Inspect the laser unit for damage from time to time. Should the laser unit or the pow-
er supply unit show any damage, disconnect them from the power supply (unplug
the power supply unit). Do not use the product after that and take it to a specialist
workshop instead.
• Never pour liquids over electrical appliances and never leave objects filled with liq-
uids (e.g., vases) in the vicinity of the device. You run the high risk of causing a fire or
a fatal electric shock. If liquids enter the device, immediately disconnect it from the
power supply, unplug the power supply unit from the mains and consult an expert.
• Do not expose the device to high temperatures, dripping or spray water, strong vibra-
tions or heavy mechanical stress.
• Do not place open flames, such as burning candles, on or near the device.
• Do not leave the device in operation when it is unattended. For reasons of safety,
unplug from the mains socket after use.
• Do not use the device in a tropical climate.
• If you are unsure about how to connect the product properly, or should you have any
questions that are not answered in these operating instructions, please contact our
technical service or consult a professional.
• Also observe any other safety instructions in the individual chapters of these operat-
ing instructions.
G
Operating instructions
GLP-FS360 Laser 360° with LED
Item no.
Intended use
The laser is intended for generating laser and LED lighting effects and is operated by the inbuilt
controller.
This product may only be operated with the enclosed power supply unit.
The safety regulations and standards for laser operation must be complied with at all times.
The product may only be used in enclosed indoor locations. Outdoor use is not allowed. Contact
with moisture, for example in bathrooms or the like, must be avoided.
Any other use than that described above is not permitted and involves additional risks, such as
injuries to the eyes, short circuits, fire etc.
No part of the product may be modified or rebuilt, and the housing must not be opened.
This product complies with the applicable National and European legal requirements. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Warning, this product includes a powerful laser. It poses a potentially serious health
hazard, if the safety instructions are not observed.
Read the operating instructions in full before you mount and start using the laser. Safe-
ty instructions included here must be followed at all times.
The user must comply with the relevant national accident prevention regulations for
electrical equipment.
This product may only be assembled, commissioned and operated by suitably quali-
fied professionals and only in compliance with the requirements stated in these oper-
ating instructions.
Due to the high laser power and the related injury risk, this laser is only permitted for
professional use.
Operation in the private domain is not permitted!
Before the product is first put into operation, the company must notify the responsi-
ble accident insurer and the public authority responsible for occupational health and
safety (generally the industrial inspectorate) and name a person who will be account-
able for laser safety.
Package contents
• Laser 360° with LED
• Power adapter
• Operating instructions
Up-to-date operating instructions:
1. Open www.conrad.com/downloads in a browser or scan the displayed
QR code.
2. Select document type and language and enter the item number into the
search field. After submitting the query you can download displayed
records.
Explanation of symbols
The lightning symbol inside a triangle is used when there is a potential risk of personal
injury, such as electric shock. The device does not contain parts that should be ser-
viced by the user. Therefore, do not open the device.
This symbol points to specific risks associated with handling, function or operation.
The arrow symbol indicates special tips and operating information.
The symbol with the house is used to inform the user that the device may only be oper-
ated in enclosed rooms.
This symbol on the device indicates that the user should read these operating instruc-
tions prior to putting the device into operation and follow the instructions when using
the product.
1419258