User manual

34
g) Automatic Operation
• PushthebuttonFUNC(5)until"ShNd"isdisplayedandpushthebuttonENTER(8).
• Selectthedesiredautomaticeect"SP01"to"SP06"withthearrows.
• PushtheENTERbutton(8)toconrmyourselection.
 Allautomaticeects(1-5)areswitchedinsequenceinthesetting"SP01".
h) Display Alignment
• PushthebuttonFUNC(5)until"dISP"or"dSIP"isdisplayed.
• PressthebuttonENTER(8)twicetochangethedisplayalignment.
dISP normal display alignment
dSIP Display alignment turned by 180°
12. Handling
• Neverconnectthemainsplugtoamainssocketimmediatelyafterthedevicehasbeentakenfromacold
to a warm environment. The resulting condensation may destroy the device. Allow the device to reach
room temperature before connecting it. Wait until the condensation has evaporated.
• Neverpluginorunplugthemainsplugwhenyourhandsarewet.
• Neverpullthemainsplugfromthemainssocketbythecable.Onlypullitfromthemainssocketbythe
intended grip areas.
• Unplugthemainsplugfromthemainssocketifyouarenotusingthedeviceforanextendedperiodof
time.
• Disconnectthemainsplugfromthemainssocketduringthunderstormsforreasonsofsafety.
• Donotcoverthedevicetoensuresucientventilation.Aircirculationalsomustnotbeimpairedbyany
objects like magazines, tablecloths, curtains, etc. During operation, keep a minimum distance of 0.5 m
around the device.