User manual

31
Display Option Function Comment
Addr 001-512 Setting the DMX starting address
UEr Ur01 Display of the software version
SoUn on Sound-to-light mode activated
oFF Sound-to-light mode deactivated
Led on Display permanently on
oFF Display switches on only after operation of
the FUNC (5) button
SLNd NASt Operation as a master device
SL 1 Operation as a slave device normal slave mode
SL 2 Operation as a slave device inverted slave mode
ShNd SP01 Allautomaticeectsalternatingly
SP02 Automaticeect1
SP03 Automaticeect2
SP04 Automaticeect3
SP05 Automaticeect4
SP06 Automaticeect5
dISP dISP Display aligned normally
dSIP Display alignment turned by 180° when the device is installed
turned by 180°
ChNd 1Ch 1-channel DMX operation
7Ch 7-channel DMX operation
b) Use with an External DMX Controller
EachDMXdeviceinaDMXchainrequiresaso-calledDMXstartingaddresstobeclearlyidentiedbythe
controller.ThisDMXstartingaddressspeciestherstDMXchanneltowhichtheeectlightresponds.
The remaining control channels come after this first DMX channel (DMX starting address).
 Theeectlightrequires1or7freeDMXchannels.
Setting the DMX operating mode
• PushthebuttonFUNC(5)until"ChNd"isdisplayedandpushthebuttonENTER(8).
• SelectthedesiredoperatingmodewiththeUP(7)andDOWN(6)buttons:
1Ch 1-channel DMX operation
7Ch 7-channel DMX operation
• PushtheENTERbutton(8)toconrmyourselection.