User manual

42
j) Temperature Display
• PushthebuttonMENU(2)until"tenp"isdisplayedandpushthebuttonENTER(5).
• Thedisplayshowstheinternaldevicetemperature.
k) Reset
• PushthebuttonMENU(2)until"rSet"isdisplayedandpushthebuttonENTER(5).
• Thedeviceperformsareset.Duringthistime,thesoftwareversionisdisplayed.
• Afterasuccessfulreset,operationwillrecommenceinthelastoperatingmode.
l) Focussing
• Adjustthesharpnessoftheprojectionasdesiredbyturningtheprojectionlensatthelens.
12. Handling
• Neverconnectthemainsplugtoamainssocketimmediatelyafterthedevicehasbeentakenfromacold
to a warm environment. The resulting condensation may destroy the device. Allow the device to reach
room temperature before connecting it. Wait until the condensation has evaporated.
• Neverpluginorunplugthemainsplugwhenyourhandsarewet.
• Neverpullthemainsplugfromthemainssocketbythecable.Onlypullitfromthemainssocketbythe
intended grip areas.
• Unplugthemainsplugfromthemainssocketifyouarenotusingthedeviceforanextendedperiodof
time.
• Disconnectthemainsplugfromthemainssocketduringthunderstormsforreasonsofsafety.
• Donotcoverthedevicetoensuresucientventilation.Aircirculationandthemovementoftheprojector
head must not be impaired by objects such as magazines, tablecloths, curtains, etc. During operation,
keep a minimum distance of 0.5 m around the device.