User manual

c) Automatic Operation

• PushthebuttonMENU(2)until"Shnd"isdisplayedandpushthebuttonENTER(5).

• Selectthedesiredautomaticeect"Sh0"to"Sh4"withtheDOWN(3)andUP(4)buttons:

Sh 0 Automatic eect 1

Sh 1 Automatic eect 2

Sh 2 Automatic eect 3

Sh 3 Automatic eect 4

Sh 4 Automatic eect 5

• PushtheENTERbutton(5)toconrmyourselection.

d) Master-Slave Mode

• PushthebuttonMENU(2)until"SLNd"isdisplayedandpushthebuttonENTER(5).

• SelectthedesiredoperatingmodewiththeDOWN(3)andUP(4)buttons:

NASt Master mode

SL1 Slave mode

• PushtheENTERbutton(5)toconrmyourselection.

If the device is to be operated as a single device (standalone), it must be deﬁned as a master

device.

Only one device in a master-slave-chain must be deﬁned as master device. All other devices

must be deﬁned as slave devices.

e) Sound-to-Light Mode

• PushthebuttonMENU(2)until"SoUn"isdisplayedandpushthebuttonENTER(5).

• SelectthedesiredoperatingmodewiththeDOWN(3)andUP(4)buttons:

on Sound-to-light mode activated

oFF Sound-to-light mode deactivated

• PushtheENTERbutton(8)toconrmyourselection.

• Theeectlightiscontrolledviatheinstalledmicrophone(6)intimewiththemusicinthismode.

• Thesensitivityofthesound-to-lightcontrolissetinthemenuinitem"SenS".

• PushthebuttonMENU(2)until"SenS"isdisplayedandpushthebuttonENTER(5).

• Selectthedesiredmicrophonesensitivity(0-100)withthebuttonsDOWN(3)orUP(4)andpushthebut-

ton ENTER (5) again to conﬁrm.

Sound-to-light operation takes precedence over automatic mode. Always switch o sound-to-

light control before choosing the automatic mode.