User manual

34
Menu overview:
Display Option Function Comment
Addr 001-512 Setting the DMX starting address
ChNd 9Ch 9-channel DMX operation
11Ch 11-channel DMX operation
Shnd Sh 0 Automatic eect 1
Sound-to-Light mode must be
switched o.
Sh 1 Automatic eect 2
Sh 2 Automatic eect 3
Sh 3 Automatic eect 4
Sh 4 Automatic eect 5
SLNd NASt Master mode
SL1 Slave mode
SoUn on Sound-to-light mode activated Precedence over automatic
mode
oFF Sound-to-light mode deactivated
SenS 0-100 Setting of the microphone sensitivity in
sound-to-light operation
PInt YeS Rotating movement is inverted
no Rotating movement is not inverted
tInt YeS Swivel movement is inverted
no Swivel movement is not inverted
Led on Display permanently on
oFF The display switches o after approx.
70 seconds after the last button is pushed.
Reactivation by pushing a but-
ton
dISP dISP Display aligned normally for standing assembly
dSIP Display alignment turned by 180° for suspended assembly
teSt teSt Performing a self-test
teNP tenp Display of internal temperature
rSet b105 Performing a reset The software version is dis-
played during reset