Manualshelf

User manual

ManualsBrandsRENKFORCE ManualsLight EffectsLED moving head spot GM 106 NS No. of LEDs:1 x 30 W
31323334353637383940
33
11. Operation
a) Setting the Operating Mode
The eect light can be controlled with the integrated controller or with an external DMX controller. Ad-
ditionally, it can be used as a master device with integrated controller to control other connected eect
lights synchronously in master-slave operation, or as slave device via the controller of another eect light.
The operating modes are set in the menu via the display (1) and the function buttons MENU (2), DOWN (3),
UP (4) and ENTER (5).
• PressMENU(2)repeatedlytoselectthedesiredfunction.
• PushtheENTERbutton(5)toconrmyourselection.
• SelectthedesiredoptionwiththeUP(4)andDOWN(3)buttons.
• PushtheENTERbutton(5)toconrmyourselection.
• Togobackonelevelinthemenu,pushthebuttonMENU(2).
The installed controller needs a few seconds to accept and implement the settings.
If no button has been pushed for more than 30 seconds, the buttons will be locked. To unlock the
buttons again, push the button MENU (2) for about 3 seconds.