User manual

23
b) Cleaning
Before cleaning the device, separate it from the power supply and allow it to cool down.
The device is maintenance-free. Never try to open it. If you do open it, the warranty will be rendered void.
Onlycleanitwithasoft,dryclothorbrush.Neveruseaggressivecleaningagentsorchemicalsolutionsas
the surface of the casing could be damaged.
You can clean the outside of thefogmachinewithamoistenedcloth.Neveruseaggressivecleaning
agents, chemical solutions or scouring agents as the paintwork could be damaged.
Toavoiddepositsandresiduesinthefoguidchannels,useaspecialfogmachinecleaner.Observethe
instructionsforthecleaningliquid.
8. Handling
• Neverconnectthepowerplugimmediatelyafterthedevicehasbeentakenfromacoldtoawarmenvi-
ronment. The condensation generated could destroy the device.
Allow the device to reach room temperature before connecting it. Wait until the condensation water has
evaporated.
• Neverpullonthepowercable.Onlyunplugitbypullingontheplug.
• Unplugthepowersupplyifyoudonotusethedeviceoveraperiodoftime.
• Forsafetyreasons,alwayspullthemainsplugfromthesocketduringathunderstorm.
• Nevertouchthedevicearoundthefogoutletduringorshortlyafteroperation.Thispartofthedevice
becomesextremelyhot.Riskofburns.
• Neverusesoiledfogliquid.Alwaysclosethetankandthefogliquidcontainerimmediatelyafterlling.
• Alwaysemptythetankbeforetransportingthedeviceorwhenitisnotusedforalongerperiodoftime.
• Onlyusewater-basedfogliquids.Suitablefogliquidsarelistedinthe„Specications“.