User manual

c) Operation

Always pull the mains plug before ﬁlling the fog machine.

Never ﬁll the machine with ﬂammable liquids or add ﬂammable liquids to the fog liquid. Only

use suitable water-based fog liquids (the CONRAD product range oers suitable fog liquids, see

„Speciﬁcations“).

Never tilt the fog machine. Fog liquid might escape or get inside the device and cause damage

or injure the operator.

Make sure that no liquid enters the interior of the device when ﬁlling it with fog liquid. This can

lead to damage to the device and can cause deadly electric shocks.

• Makesurethatthemainsplugisnotpluggedin.

• Unscrewthetankcoverfromthedeviceandllfogliquidintothetank.

• Screwthetankcoverrmlybackintoplace.

• Plugtheconnectionplugoftheremotecontrolintothecorrespondingsocketonthebackofthefog

machine.

• Insertthemainsplugintoanearthedmainssocket.

• Switchonthedeviceusingthepowerswitch.Whenthedeviceisswitchedon,thepowerswitchislitand

the fog machine heats up.

• Theheat-upprocesstakesabout3-4minutes.

• Whenthedevicehasreachedoperatingtemperature,thetwoindicatorsontheremotecontrollightup

and the device is ready to produce fog.

• Pressthefogbuttonontheremotecontroltomanuallytriggerthefogfunction.

• Makesurethatthetankneverrunsemptyduringoperation.Ifitdoesrunempty,immediatelyswitcho

the fog machine via the power switch and allow it to cool down.

• Rellthetankwhenthedevicehascooleddown.

• Ifnofogisproduced,thedeviceisstillheatinguporreheating(theindicatorsontheremotecontrolare

not lit).

• Whenthedeviceisswitchedo,asmallamountoffogmightstillcomeoutofit.Thisisnormalanddoes

not indicate a defect.

• Ifyounolongerrequirethedevice,disconnectthemainsplugandallowthedevicetocooldown.

• Emptythetankifyouarenotusingthedeviceforalongerperiodoftime.Thispreventsfogliquidfrom

escaping during transport or storage.