User manual

31
11. Operation
a) General Media Operation
The eect light can be controlled with the integrated controller or with an external DMX controller. Additi-
onally, it can be used as a master device with integrated controller to control other connected eect lights
synchronously in master-slave operation, or as slave device via the controller of another eect light.
The settings are made in the menu via the display and the function buttons MODE/ESC (1), UP (2),
DOWN (3) and ENTER (4).
• Push the button MODE/ESC (1) to select menu items or to get one level back in the menu.
• Use the buttons „UP“ (2) or „DOWN“ (3) to select the desired menu item.
• Push ENTER (4) to confirm selection or to select a sub-item in the menu.
After a short time without a button being pushed, the display will be switched o. It can be activa-
ted again at any time by pushing any button.
Menu Overview
Display Option Explanation
d001 d001 - d512 DMX address setting
nASL / nAFA / nStS / nStc / SLAu Standalone mode
PAn / rPAn Reverse rotating direction
tiL / rtiL Reverse swivel direction
diS / rdiS Setting display alignment
13CH / 5CH DMX operating mode
PA54 / PA36 / PA18 Limit rotating angle
ti27 / ti18 / ti 9 Limit swivel angle
rESt Reset
LoAd Loading Factory Setting