User manual

31
Setting the DMX starting address
• Press MODE/ESC (1) repeatedly until Addr appears.
• Push the button ENTER (4) until Axxx (xxx = set DMX start address) appears.
• Use the buttons UP (2) or DOWN (3) to select the desired DMX starting address.
• Press the ENTER button (4) to confirm your input.
The following tables provide information about the eects of the settings on the individual DMX channels.
5-channel DMX operation
DMX channel DMX value Function
1 000-255 Rotating movement PAN
2 000-255 Swivel movement TILT
3 000-255 Speed for PAN and TILT fast > slow
4 000 No strobe eect
001-255 Strobe eect slow > fast
5 000 Light o
001-255 Colour selection
12-channel DMX operation
DMX channel DMX value Function
1 000-255 Rotating movement PAN
2 000-255 Fine setting rotating movement PAN
3 000-255 Swivel movement TILT
4 000-255 Fine setting swivel movement TILT
5 000-255 Speed for PAN and TILT fast > slow
6 000 No strobe eect
001-255 Strobe eect slow > fast
7 000-255 Brightness red (0 % > 100 %)
8 000-255 Brightness green (0 % > 100 %)
9 000-255 Brightness blue (0 % > 100 %)
10 000 Channels 7-9 are active
001-255 Colour selection (Channels 7-9 are deactivated)
11 000 Channels 1-11 are active
001-084 Automatic mode slow (Channels 1-11 are deactivated)
085-169 Automatic mode fast (Channels 1-11 are deactivated)
170-255 Sound-to-Light Mode (Channels 1-11 are deactivated)
12 000-254 no function
255 Reset