User's Manual

7.
17
ZcoRE3-2400_User_Manual_V1.0
7.1
3: The height of the shield box on the top layer is less than 4.3mm from PCB board.
2: P1 is the MMCX connector for SMA antenna (connect via an MMCX-SMA RF cable)
and available only in ZcoRE3(20)-2400.
1: E1 is for the chip antenna and available only in ZcoRE3-2400. The length of the chip
antenna is less than 7.3mm
Note:
Mechanical Drawing
Top View
Units: mm