User's Manual

Table 5.2.2: Detailed information of RMCI package
Command Name
CMD
Code
CMD Data
(bytes)
Response
CMD Code
Response CMD
Data (Bytes) Description
FFD_ENABLE
Use on: Coordinator/RFD
0x32 None 0x33 None Set radio to FFD. Always on and has router function.
CHG_RRCM_CHAN
Use on:
Coordinator
0x34 Channel
Number(1)
0x35 None Requests RCM in the Gateway to change its radio channel to specified channel.
0x0B to 0x1A total 15 channels.
Corresponding to 11 to 26 of IEEE 802.15.4.
DEL_LOCAL_BINDING
Use on:
Coordinator/FFD/RFD
0x36 Binding
index(1)
0x37 None Deletes binding indexes stored in the radio.
Binding index is from 1 to 30.
Always 1 for FFD and RFD
RPT_LOCATION
Use on: RFD
0x38 None 0x39 None Report RFD parent’s ID.
LEAVE_NETWORK
Use on: Coordinator/FFD/RFD
0x3E None 0x3F None Leave the current network
RFD_ENABLE
Use on: Coordinator/FFD
0x46 None 0x47 None Put a node into RFD. PE7 interrupt enable. Active low.
SOFT_RST 0x48 None 0x49 None Reset the radio
FACTORY_RST
Use on:
Coordinator/FFD/RFD
0x4A None 0x4B None Restore the RCM to factory defaults.
Channel: 0x1A, Power: 0xFF, PanID: 0x30FF Sensor Node FFD.
Baud rate: 19200 8N1
VERSION_CHK
Use on:
Coordinator/FFD/RFD
0x4C None 0x4D DS[0] = ‘V’
DS[1~n+1]
Firmware
Version [0~n]
Request Firmware Version. Return In ASCII.
e.g.: “ EZ2.23.0.0 ”
Send:5B244C5D
Return:5B 2E 4D 45 5A 32 2E 32 33 2E 30 2E 30 5D
14