User's Manual

ZcoRE3-2400_User_Manual_V1.0
Base on correct setting and connection, you will see following display on your screen when
power is applied.
Coordinator:
EVENT: emberInit passed
INIT: sink app 000D6F0000002DF8 chan:0x1A, pwr:FF, panID:0x30FF
EVENT: stack Status now EMBER_NETWORK_UP
EVENT: setting multicast binding, status is 0x00
FFD:
EVENT: emberInit passed
FFD SENSOR APP: joined to network
000D6F0000002DA5 chan:0x1A, pwr:FF, panID:0x30FF
EVENT: stack Status now EMBER_NETWORK_UP
EVENT: setting multicast binding, status is 0x00
This is a free sensor.
RFD (if there is a coordinator or FFD)
EVENT: emberInit passed
RFD Sleep SENSOR APP: joined to network
000D6F0000002DA5 chan:0x1A, pwr:FF, panID:0x30FF
EVENT: stack Status now EMBER_NETWORK_UP
EVENT: setting multicast binding, status is 0x00
This is a free sensor.
RFD (if there is no coordinator or FFD)
EVENT: emberInit passed
RFD Sleep SENSOR APP: joined to network
000D6F0000002DA5 chan:0x1A, pwr:FF, panID:0x30FF
EVENT: stackStatus now MOVE_FAILED. Lost the Parent (Coordinator)
10